Error #304
tancat[Clearance] AP mode is not working
Descripció
This is ambiguous:
The AP mode provided in luci "Wireless Settings" is for make point-to-point links, labeled "Master (no DHCP)". I suppose that Client works with that Master, but is not a general Client for wifi connections.
I propose a better documentation as in quick setup
Proposal:
AdHoc (mesh) + Access Point (LAN): dedicates the wifi device to mesh and an Access Point to clients.
AdHoc (mesh): dedicates the wifi device to mesh.
Master (mesh, no DHCP): Master in AP mode for Point-to-Point wifi link
Client (mesh): Client in AP mode for Point-to-Point wifi link
[feature?] Access Point (LAN): dedicates the wifi device as an Access Point to clients
Is missing:
An exclusively and generic (full) AP mode (the mesh can go through ethernet).
Is not working:
The unique mode in Wireless Settings is AP+mesh
0% SSID: guifi.net/qMpNS2
Mode: Ad-Hoc
Channel: 6 (0.000 GHz)
Bitrate: ? Mbit/s
BSSID: 02:CA:FF:EE:BA:BE
Encryption: -
Signal: 0 dBm / Noise: -95 dBm
0% SSID: guifi.net/qMpNS2-AP
Mode: Client
Channel: 6 (0.000 GHz)
Bitrate: ? Mbit/s
Wireless is disabled or not associated
qMpNS2 is accessible from guifi.net Barcelona:
10.30.235.1
Actualitzat per Roger Pueyo Centelles fa més de 6 anys
- Categoria s'ha establert a Wireless
- Estat ha canviat de Nou a Tancat
- Assignat a s'ha establert a Roger Pueyo Centelles
- Prioritat ha canviat de Normal a Alta
- Versió prevista s'ha establert a 4.1 "Macondo"
- % realitzat ha canviat de 0 a 100
- Temps previst s'ha establert a 5:00 h
Hi Pedro,
Thanks for reporting.
The following wireless modes (L2 and L3) are now available:
- 802.11s (mesh)
- Ad-hoc (mesh)
- Access point (mesh)
- Client (mesh)
- Access point (LAN)
- Client (WAN)
- 802.11s (mesh) + Ad-hoc (mesh)
- 802.11s (mesh) + Access point (LAN)
- Ad-hoc (mesh) + Access point (LAN)
which, so far, cover the requirements and suggestions made.