Projecte

General

Perfil

Actions
Copy link

Error #325

tancat

NanoBeam M5 19 does not boot

Afegit per Brian Hall fa aproximadament 10 anys. Actualitzat fa més de 9 anys.

Estat:
Tancat
Prioritat:
Normal
Assignat a:
-
Categoria:
Devices
Versió prevista:
-
Inici:
01-12-2014
Data de venciment:
% realitzat:

0%

Temps previst:

Descripció

NanoBeam M5 19 is said to be hardware compatible with LocoM5 but after installing the image the NanoBeam failed to boot and required a firmware recovery

Steps-
1) New M5 19 running AirOS and load image-
NanoStationLocoM5-XW-qMp_kalimotxo-factory-20141119_1708.bin

Result-
NanoBeam unresponsive

Actions
Copy link
 #1

Actualitzat per Brian Hall fa aproximadament 10 anys

cannot ping-
bh-macbook:~ bh$ ping6 ff02::1%eth0
ping6: UDP connect: No route to host

Actions
Copy link
 #2

Actualitzat per Brian Hall fa aproximadament 10 anys

generic OpenWRT image fails too-
openwrt-ar71xx-generic-ubnt-loco-m-xw-squashfs-factory.bin

There is a trac ticket about it here:
https://dev.openwrt.org/ticket/16796

and a forum post here:
https://forum.openwrt.org/viewtopic.php?id=49305

Actions
Copy link
 #3

Actualitzat per Roger Pueyo Centelles fa aproximadament 10 anys

It seems that you are using OS X. Is eth0 the name of the Ethernet device?

Brian Hall va escriure:

cannot ping-
bh-macbook:~ bh$ ping6 ff02::1%eth0
ping6: UDP connect: No route to host

Actions
Copy link
 #4

Actualitzat per Brian Hall fa aproximadament 10 anys

thanks! I tried again with correct name of ethernet device and it worked. (still no wifi) What should I try now?

bh-macbook:~ bh$ ping6 ff02::1%en4
PING6 fe80::6a5b:35ff:fe8e:a0b8%en4 --> ff02::1%en4
16 bytes from fe80::6a5b:35ff:fe8e:a0b8%en4, icmp_seq=0 hlim=64 time=0.084 ms
...

Actions
Copy link
 #5

Actualitzat per Roger Pueyo Centelles fa més de 9 anys

  • Categoria s'ha establert a Devices
  • Estat ha canviat de Nou a Tancat
Actions
Copy link

També disponible a: Atom PDF