Projecte

General

Perfil

Actions
Copy link

Error #377

tancat

Network configuration is not really applied after "Saving and applying" settings and a manual reboot is needed to have it working

Afegit per Roger Pueyo Centelles fa més de 9 anys. Actualitzat fa més de 9 anys.

Estat:
Tancat
Prioritat:
Normal
Assignat a:
Roger Pueyo Centelles
Categoria:
Network
Versió prevista:
-
Inici:
04-08-2015
Data de venciment:
% realitzat:

100%

Temps previst:
8:00 h
Temps invertit:
16:00 h

Descripció

What the subject says :) This has been reported on the mailing lists too.

@Axel Neumann:
In the simple "qMp easy setup" page there is a switch (enabled by
default) which should allow to disable mesh on all ethernet devices.
Disabling that did not work but resulted in a several minutes
unresponsive device untill we rebooted the hard way. Then the switch was
still enabled.

@Juergen:

Settings:

3 Picostation M2 (qMp Clearance 3.2-rc2 ) A B C configured only basic
settings

A and B are meshing

A as gateway B as MP >> B has internet
B as gateway A as MP >> A has no internet
C does not mesh with A nor with C
C as gateway has internet

1. C is connected to WAN but status did not show time nor memory.as long
as ESSID was not configured manually in Administration

Actions
Copy link

També disponible a: Atom PDF