Projecte

General

Perfil

Actions
Copy link

Suport #447

obert

webgui on nodes never finishes loading when running lan-only mesh on wdr3500 and wdr3600

Afegit per leonardo taborda fa casi 7 anys. Actualitzat fa més de 3 anys.

Estat:
Nou
Prioritat:
Urgent
Assignat a:
Roger Pueyo Centelles
Categoria:
Network
Versió prevista:
5.1
Inici:
05-02-2018
Data de venciment:
% realitzat:

0%

Temps previst:
10:00 h

Descripció

wdr-3500
ip: 10.1.0.1
LEDE Reboot 17.01.4 r3560-79f57e422d

wdr-3600
ip: 10.1.1.1
LEDE Reboot 17.01.4 r3560-79f57e422d

Both devices are doing wired mesh, on the wan port., mesh over wifi disabled.

If you try to access the 10.1.1.1 webui by using any client connected on 10.1.0.1, and with any browser, the webui never finishes loading at all. The same behavior happens on the opposite direction. Trying to reach the 10.1.0.1 webui from a client on 10.1.1.1, the intended webui never loades at all

The same behavior happens between wdr3600 routers. This has been observed on a real deployment that prevents linking two separated mesh clouds using mikrotik devices plugged to wan ports, acting as a long dumb cable.
This qMp iteration sometimes feels that loads the webui slower than previous qmp versions on the wdr3600

Things that work in this small setup:
-ssh to the desired router over the mesh
-ping to nodes
-ping to clients in any node from any node

a video depicting the issue is attached: https://youtu.be/9hhqLH374vA

Actions
Copy link

També disponible a: Atom PDF