Suport #476
obert
Mixed 'mesh + legacy' mode only works as 'mesh' in 4.2.1 and onwards (4.2.2 and Kalimotxo). Affecting three/four models at least.
Afegit per fa casi 5 anys.
Actualitzat fa més de 3 anys.
Descripció
Hi
We have noticed that in the following combinations:
1) Ubiquiti Nanostation XW old (pre 1847G) and new (post 1846G) with qMp 4.2.1, 4.2.2 or Kalimotxo
2) Comfast Cf-E120A-V3 with qMp Experimental aka Kalimotxo
3) TP-Link CPE 510-V3 with qMp Experimental aka Kalimotxo
Any of those devices-versions are not working in 'mesh + legacy' mode.
When 'mesh + legacy' is selected they are working as mere 'mesh' mode.
This is happening with those four models in any version higher that 4.2.
qMp 4.2 works fine.
The tests have been conducted with a 3.2.1 Ubiquiti Nanostastation (pre 1847G).
This last device works well with any device running qMp 4.2 or lower.
Regards
Alex
guifi.net Madrid
- Categoria s'ha establert a Wireless
- Assignat a s'ha establert a Roger Pueyo Centelles
- Versió prevista s'ha establert a v5.0.0
- Temps previst s'ha establert a 8:00 h
- % realitzat ha canviat de 0 a 10
Just tested on a NS-M5-XW 1441K with Kalimotxo (OpenWrt snapshots), it's working.
Same device, qMp 4.2.3 => working.
Also working fine on this device, running qMp testing (19.07.1).
- % realitzat ha canviat de 10 a 30
BusyBox v1.28.4 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt 18.06.7, r7976-ca47026b7d
-----------------------------------------------------
__ _ /\/\ _ __
/ _` |/ \| '_ \
| (_| / /\/\ \ |_) |
\__, \/ \/ .__/
|_| |_|
quick MESH project
---------------------------------------------------
qMp 4.2.2 Macondo (branch 4.2.2 rev.9b11ead-20200220-1709)
---------------------------------------------------
http://dev.qmp.cat/projects/qmp/repository/show?branch=4.2.2&rev=9b11ead
---------------------------------------------------
root@qMp-6e79:~# tail -n 20 /etc/config/qmp
option bmx6_mesh_prefix48 'fd02:0:0'
option lan_ula_prefix48 'fd00:1714:1714'
option bmx6_ripe_prefix48 '2012:0:0'
option publish_lan '0'
option bmx6_ipv4_address '10.202.0.121/32'
config qmp 'wireless'
option driver 'mac80211'
option country 'US'
option bssid '02:CA:FF:EE:BA:BE'
option mrate '6000'
config wireless
option name 'qMp'
option txpower '17'
option channel '165'
option mac '04:18:d6:94:6e:79'
option device 'wlan0'
option mode '80211s_adhoc'
root@qMp-6e79:~# bmx6 -c interfaces
interfaces:
devName state type rateMin rateMax llocalIp globalIp primary
eth0_1_12 UP ethernet 1000M 1000M fe80::618:d6ff:fe95:6e79/64 fd66:66:66:a:618:d6ff:fe95:6e79/64 1
eth0_2_12 UP ethernet 1000M 1000M fe80::618:d6ff:fe95:6e79/64 fd66:66:66:c:618:d6ff:fe95:6e79/64 0
wlan0_12 UP wireless 6222K 56000K fe80::618:d6ff:fe94:6e79/64 fd66:66:66:10:618:d6ff:fe94:6e79/64 0
wlan0a_12 UP wireless 6222K 56000K fe80::418:d6ff:fe94:6e79/64 fd66:66:66:11:618:d6ff:fe94:6e79/64 0
root@qMp-6e79:~#
root@qMp-6e79:~# bmx6 -c links
links:
name llocalIp viaDev rxRate txRate bestTxLink routes wantsOgms
qMp-ee72 fe80::4e5e:cff:febd:ee73 wlan0_12 100 100 1 1 1
qMp-ee72 fe80::4c5e:cff:febd:ee73 wlan0a_12 100 100 0 0 0
root@qMp-6e79:~#
See "bmx6 -c links" above, there are two connections via wlan0_12 (11s) and wlan0a_12 (adhoc) to another device with the same 11s+legacy settings (this other device with qMp 4.2.3).
- Versió prevista ha canviat de v5.0.0 a v5.0.1
- Versió prevista ha canviat de v5.0.1 a 5.1
També disponible a: Atom
PDF