Error #477
obert
Cannot configure qmp-wireless in Nanostation XM post 1846G (menu has disappeared)
Afegit per fa casi 5 anys.
Actualitzat fa més de 3 anys.
Descripció
Hi,
Menu and pages for configuring wireless options on qMp tab on qMp firmware on versions 4.2.1 and higher (confirmed also 4.2.2) are missing on Ubiquiti Nanostation XW post 1846G HW revision.
They can be changed via cli editing /etc/config/qmp and changes are applied after a reboot. Is there a quicker way?
Regards
Alex
guifi.net Madrid
The way to set wireless to mixed mode (although not working, see http://dev.qmp.cat/issues/476) is by editing /etc/config/qmp and changing in "config wireless" the "option mode" to "'80211s_adhoc'"
Resulting in:
[...]
config wireless
option mode '80211s_adhoc'
[...]
Note that even though this option is set, qmp wireless will only work as legacy in this model, so devices running 3.x will not connect to it in any wireless way.
Typo: In this model wireless will only work in * 802.11s * mode, dropping ad-hoc mode.
- Categoria s'ha establert a WEB interface
- Assignat a s'ha establert a Roger Pueyo Centelles
- Versió prevista s'ha establert a v5.0.0
- Temps previst s'ha establert a 4:00 h
- Versió prevista ha canviat de v5.0.0 a v5.0.1
- Versió prevista ha canviat de v5.0.1 a 5.1
També disponible a: Atom
PDF