Projecte

General

Perfil

Actions
Copy link

Error #484

tancat

Switched Ethernet devices with all ports in one VLAN are not correctly handled during autoconfiguration

Afegit per Roger Pueyo Centelles fa aproximadament 4 anys. Actualitzat fa aproximadament 4 anys.

Estat:
Tancat
Prioritat:
Alta
Assignat a:
Roger Pueyo Centelles
Categoria:
Network
Versió prevista:
v5.0.0
Inici:
01-12-2020
Data de venciment:
% realitzat:

100%

Temps previst:
4:00 h
Temps invertit:
4:00 h

Descripció

For example, EdgeSwitch 8 XP has eth0 with 8 switch ports on eth0.1 inside br-lan, and eth1 on its own. Instead of using eth0.1 as LAN device, it puts eth0, which is incorrect and does not work.

Actions
Copy link
 #1

Actualitzat per Roger Pueyo Centelles fa aproximadament 4 anys

  • Estat ha canviat de Nou a Resolt
  • % realitzat ha canviat de 0 a 100
  • Temps previst ha canviat de 2:00 h a 4:00 h

Fixed in b3ea015da20b31f89faa1ceff3e8f10a79c007bf.

In slow devices with switched interfaces, (e.g., eth0.1.), these take some
seconds to appear under /sys/class/net after a network restart. Therefore,
default OpenWrt interfaces, which are well-known to exist from /etc/board.json,
seem to not be there, and qmp_configure_smart_network skips them.

By waiting for the known interfaces in $default_lan and $default_wan to appear
    under /sys/class/net we get proper interfaces detection:
---------------------------------------
    Starting smart networking configuration
    ---------------------------------------
    Default device network:
    - LAN eth0.1
    - WAN eth1
    Waiting for eth0.1...  (0)
    Waiting for eth0.1...  (1)
    Waiting for eth0.1...  (2)
    Network devices found:
    - LAN  eth0.1
    - MESH  eth0.1 eth1
    - WAN  eth1
    - NO VLAN  eth0.1 eth1
    ... done!
Actions
Copy link
 #2

Actualitzat per Roger Pueyo Centelles fa aproximadament 4 anys

  • Estat ha canviat de Resolt a Tancat
Actions
Copy link

També disponible a: Atom PDF