Projecte

General

Perfil

v5.0.0

tancada

20-07-2020

qMp version 5.0.0 "Leverage" based on OpenWrt 19.07

100%

14 assumptes   (14 tancats — 0 oberts)

Temps de seguiment
Temps previst 60:00 hores
Temps invertit 57:00 hores
Assumptes per
Suport

2/2
Error

9/9
Característica

3/3
Assumptes relacionats
Suport #478: "Device ID" in qMp easy setup appears before community selection Actions
Suport #479: "Country Code" in qMp easy setup not really working Actions
Error #422: 802.1AD have small MTU value Actions
Error #423: Devices with a single Ethernet interface and a swith driving different ports (e.g. eth0=> eth0.1+eth0.2) are not properly managed if the switch is on eth1 instead of eth0 (case of TL-WR841N-v8) Actions
Error #429: A wireless device configured as "ignored" by qMp can not be reconfigured again Actions
Error #474: Custom community names are not included into the hostname Actions
Error #475: /usr/lib/lua/luci/dispatcher.lua:756: module 'luci.cbi' not found: Actions
Error #481: LAN bridge consistently gets 169.254.185.1 address during qmp_autoconf Actions
Error #484: Switched Ethernet devices with all ports in one VLAN are not correctly handled during autoconfiguration Actions
Error #485: MikroTik devices have their MAC addresses removed Actions
qMp firmware cooker - Error #486: TP-Link CPE-510-v3 images not generated Actions
Característica #214: Autodetect mesh/lan/wan device Actions
Característica #461: Allow choosing wireless country Actions
Característica #470: Check WiFi status when using 802.11s on DFS-enforced channels Actions