Error #325
tancat
NanoBeam M5 19 does not boot
Afegit per Brian Hall fa més de 11 anys.
Actualitzat fa aproximadament 11 anys.
Descripció
NanoBeam M5 19 is said to be hardware compatible with LocoM5 but after installing the image the NanoBeam failed to boot and required a firmware recovery
Steps-
1) New M5 19 running AirOS and load image-
NanoStationLocoM5-XW-qMp_kalimotxo-factory-20141119_1708.bin
Result-
NanoBeam unresponsive
cannot ping-
bh-macbook:~ bh$ ping6 ff02::1%eth0
ping6: UDP connect: No route to host
It seems that you are using OS X. Is eth0 the name of the Ethernet device?
Brian Hall va escriure:
cannot ping-
bh-macbook:~ bh$ ping6 ff02::1%eth0
ping6: UDP connect: No route to host
thanks! I tried again with correct name of ethernet device and it worked. (still no wifi) What should I try now?
bh-macbook:~ bh$ ping6 ff02::1%en4
PING6 fe80::6a5b:35ff:fe8e:a0b8%en4 --> ff02::1%en4
16 bytes from fe80::6a5b:35ff:fe8e:a0b8%en4, icmp_seq=0 hlim=64 time=0.084 ms
...
- Categoria s'ha establert a Devices
- Estat ha canviat de Nou a Tancat
També disponible a: Atom
PDF