Actions
Error #439
closedIssues with bridged LAN ports on Nanostation M5 XW
Status:
Tancat
Priority:
Normal
Assignee:
Category:
Network
Target version:
Description
Hello,
We have tried with current Macondo 4.0 release to bridge both Ethernet ports, which has resulted in lost or intermittent connectivity by both wired and wireless interfaces.
However, a workaround is to assign both "LAN" and "WAN" ports to "eth0.1" vlan and, additionally, specifying no mesh work on eth0.2 and no LAN/LAN mode in "easy setup".
Regards
Jandro MartÃn
Updated by Roger Pueyo Centelles over 6 years ago
- Target version changed from 4.0.1 to 4.1 "Macondo"
Updated by Roger Pueyo Centelles over 6 years ago
- Status changed from Nou to Tancat
- % Done changed from 0 to 100
- Estimated time set to 6:00 h
Because of the limitations of the hardware more specifically, the integrated switch that drives the two network ports (eth0.1 and eth0.2) via a single network interface (eth0), some combinations do not work, more specifically:
- eth0.1 LAN and eth0.2 LAN
Actions