Project

General

Profile

4.1 "Macondo"

closed

10/01/2018

qMp 4.1 "Macondo" based on OpenWrt 18.06

100%

37 issues   (37 closed — 0 open)

Time tracking
Estimated time 110:00 hours
Spent time 107:12 hours
Issues by
Suport

7/7
Error

24/24
Característica

5/5
Design

1/1
Related issues
Suport #98: Instruccions per desactivar el portal captiu. Actions
Suport #419: eth0 and eth1 are WAN and LAN respectively in TL-WR841N Actions
Suport #424: Macondo and 3.2.1 issue on wr940n v2 (wr941nd v5) Actions
Suport #440: OpenWrt SNAPSHOT r5671-c5ca1c9 / LuCI Master (git-18.003.32380-b121f95) ZBT-APE-522iii Actions
Suport #441: root password overwritten on first boot (or after flashing) Actions
Suport #455: The "Node settings" page does not save the changes Actions
Suport #469: 4.0-Macondo: - general setup clearance about qmp and its compilation Actions
Error #298: Domains to publish form tooltip is wrong Actions
Error #304: [Clearance] AP mode is not working Actions
Error #328: Tinyproxy not working on qMp >= 3.0 Actions
Error #392: mdns locks qmp_configure_all Actions
Error #420: DHCP reservation doesn't work Actions
Error #421: DNS resolver 127.0.0.1 doesn't work on qMp node Actions
Error #432: Add missing file /usr/lib/lua/luci/view/admin_status/index.htm when luci-mod-admin package is not installed (qmp-cli) Actions
Error #439: Issues with bridged LAN ports on Nanostation M5 XW Actions
Error #443: Can't IPv4 ping between nodes in qMp 4.0 Macondo Actions
Error #451: [qmp-ncgui] Missing dependency wget Actions
Error #452: Network configuration doesn't manage an interface in LAN without mesh VLAN tagging properly Actions
Error #453: The IPv4 address textfield in Wizard => NATTED mode (and also in network settings) does not pass the browser's HTML5 validation Actions
Error #454: Community name (i.e. Guifi.net) is not being stored to /etc/config/qmp Actions
Error #456: Wireless settings page not working Actions
Error #460: qMp autoconfiguration script does not autoconfigure the wireless interfaces Actions
Error #462: During first boot's autoconf, both radios in 5 and 2.4 GHz are set as "802.11s + AP (LAN)" with wrong network in /etc/config/wireless Actions
Error #463: When dual wifi mode (e.g.: 802.11s + adhoc) is used, wlan0 and wlan0a are shown in Easy Setup Actions
Error #464: After changing wifi settings, the [logical] network interfaces don't come up until reboot Actions
Error #465: "Network mask" in easy setup is not properly read from /etc/config/qmp Actions
Error #466: Devices with a switch on eth0 and eth0.1 eth0.2 interfaces on top of it are not properly autoconfigured Actions
Error #467: Two wireless interfaces each on a different band are configured differently if they are "radio0=>5GHz, radio1=>2.4GHz" or "radio0=>2.4GHz, radio1=>5GHz" Actions
Error #468: Community name is not saved in ¿Natted? mode Actions
Error #471: hwmode must be 11a, 11b or 11g, not 11na or 11ng Actions
Error #473: Wireless interfaces get a 802.1ad VLAN when reconfigured from a non-functional status Actions
Característica #295: "Offer" tunnels can not add "Additional Fields" Actions
Característica #363: Add a captive portal or a splash screen for user connections Actions
Característica #394: Proper detection and autoconfiguration of wireless interfaces Actions
Característica #457: [nc-gui] All the "debug" options are shown in the menu Actions
Característica #458: [nc-gui] The menu entry should be integrated into the "Tools" menu Actions
Design #391: Remove code debris after commit 6d03214db8f3bdf07ff60b45d911d86d8cb6211e Actions